Lightwave Easter Sale
Easter Lightwave Sale
Save on All Lightwave Dimmers, Sockets & Starter Kits

Seamless Square Polished Chrome Flex Outlet Plate

This product is not currently available



Socket and Switch Sizes - Single 86mm x 86mm, Twin 146mm x 86mm

Please note ‐ These sockets and switches are individually handcrafted including the finish which means the expected delivery time is 20 to 30 working days. This can be subject to change and is not guaranteed.



Show Prices Ex VAT

Prices

 *Free delivery on orders over £95.


What is a Flex Outlet Plate?

Flex Outlet Plates are also known as Cable Outlet Sockets. These plates are used when wiring an appliance typically under a unit or worktop where the isolator is located elsewhere. They usually have a hole in the front plate and each plate has 4 terminals on the back that wire via a screw connector. You will also find an earth connection. The flex would be secured using the cable clamp also located on the back.

The connectors are rated to accept a maximum load of 20 amps. Remote isolation or fused protection is required via a Spur Connection Unit or back at the consumer Unit.

We recommend 25mm deep wall boxes for mounting our Flex Outlet Plates.

If you require any advice or assistance please call our sales team on 01926 289289.

If you require any advice or assistance please call our sales team on 01926 289 289.


Wiring Diagram

See the wiring diagram for Flex Outlets.


© 2024 Copyright Sockets And Switches
Sockets & Switches, Unit A5, Quarry Park, Old Milverton Lane, Blackdown, Leamington Spa, Warwickshire, CV32 6RW  |  [email protected]